| Model manufacturer: | HM Car Models |
| Order code: | KARC734SPOJE |
| Scale: | 1:43 |
| Material: | Resin |
| Weight: | 0.9 kg |
| Dimensions: | 26×7×7.2 cm (L×W×H) |
| Machine manufacturer: | Karosa |
Handmade resin model of the bus KAROSA C734 SPOJE from 1975-1997 with movable wheels. The model is packed on a pedestal with a description and in a PVC box.
The C 734 bus has become the basic model of the new 700 body series. It is a two-axle vehicle with a square, semi-self-supporting body of panel construction. The engine is located behind the rear axle, in the area of the rear panel. There is a luggage compartment with a volume of 3.5 m³ between the axles under the body.
C 734 vehicles were primarily operated by ČSAD companies on shorter intercity and regional lines throughout Czechoslovakia. Many of them are also still in operation, but their number is gradually decreasing due to the supply of modern vehicles. A smaller number of units were also purchased by some transport companies (e.g. Brno or Prague), where these vehicles drove on suburban lines or were used as sightseeing vehicles. A total of 1,458 C 734s were also exported, most of which were driven in the former Soviet Union
After 2020, when the operation of C 734 vehicles of the carrier ČSAD buses Plzeň in the Plzeň region was terminated, only two C 734 buses remained in regular service, namely with the carrier VV buses in the Karlovy Vary region around Toužimi, Žlutíc and Bečova nad Teplou.
